1 (edited by norbertogcruz 2017-02-28 16:18:40)

Topic: (Solved) UFX 4 mic/preamp question

Hi to all!

I'm sorry but i'm quite new in the pro audio world, but very happy with my UFX! I'm having na issue that i dont understand, when i connect a TRS (with na electric guitar) cable in the front preamps of my ufx, i have no input signal, i've tried to Plug the trs in the balacen inputs in the rear na it went ok. Does the 4 mic/pre work only with XLR and phantom power? why i did not receive áudio input signal whit the TRS cabel. So sorry for my english and my (most likely) dumb question. Cheers!

Norberto

RME Fireface UFX (one)
-Windows 10 home, Intel core i7 3.40Ghz, ram 128 Gb.
- Cubase 10.5

Re: (Solved) UFX 4 mic/preamp question

Of course you can use the Mic 9..12 input channels in the front for guitar.
BUT
1. you need a normal guitar cable (TS not TRS). With Mono Plugs so to say (TRS is for synchronous connections)
2. you need to set the input to "Instrument" in TotalMix FX

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: (Solved) UFX 4 mic/preamp question

It works! Thank you so much Ramses!!

RME Fireface UFX (one)
-Windows 10 home, Intel core i7 3.40Ghz, ram 128 Gb.
- Cubase 10.5

Re: (Solved) UFX 4 mic/preamp question

You're welcome. In these blog articles you can see whats all possible for a guitar rig.

1. UFX* for guitar Rig
http://www.tonstudio-forum.de/blog/inde … arren-Rig/

2. general overview how to setup TM FX (DE / EN)
http://www.tonstudio-forum.de/blog/inde … teps-DE-E/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: (Solved) UFX 4 mic/preamp question

Thank you Ramses for your attention! It was really helpful!

RME Fireface UFX (one)
-Windows 10 home, Intel core i7 3.40Ghz, ram 128 Gb.
- Cubase 10.5

6 (edited by giladxxx 2017-03-16 12:41:53)

Re: (Solved) UFX 4 mic/preamp question

hi,

After I read the blog
I Could not find how to change the mic (1/2 Input) channel to instrument channel.

How I have to do that?

thanks

Re: (Solved) UFX 4 mic/preamp question

giladxxx wrote:

hi,

After I read the blog
I Could not find how to change the mic (1/2 Input) channel to instrument channel.

How I have to do that?

thanks

See my answer in your other thread about the same question.

In regards of my blog article, you can even see it in the screenshot ... see the knob "Inst"

http://www.tonstudio-forum.de/index.php/Attachment/1860-02-TotalMix-FX-Screenshot-png/

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13