Topic: Looking for perfect EQ-setting with Fostex TH900

Did anyone already testing the EQ-Settings to get the perfect TH900 sound with adi 2 pro?
https://www.innerfidelity.com/images/FostexTH900.pdf

I would like to have better louder voices, but i am no sound engineer

Adi-2 Pro, Adi-2 Dac Fs

Re: Looking for perfect EQ-setting with Fostex TH900

This will be tricky as every voice is a little bit different.

http://www.dvinfo.net/forum/all-things- … c-mix.html

Maybe experiment in Band 3 (F500) and raise the Level 1st to a much higher value of i.e. +10dB and then sweep the frequency between 500 - 1000 to find out where the most impact is. Then lower the Gain and still sweep around that frequency.
Might work or not .. simply try.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: Looking for perfect EQ-setting with Fostex TH900

I would like to make a boost about 6 db here
from 400 to 700 Hz to make it not so curved.
http://www.directupload.net/file/d/5175 … 5w_jpg.htm

So boost at 540Hz  with Q1.6 might be fine.

http://www.sengpielaudio.com/Rechner-gr … uenzen.htm

A tool would be great therefore.

Adi-2 Pro, Adi-2 Dac Fs

4 (edited by SpeakFriend 2018-08-10 13:56:08)

Re: Looking for perfect EQ-setting with Fostex TH900

It's quite difficult to EQ against the innerfidelity measurements, but apart from the boost you mention I would try scooping out the midbass a little (200-240 Hz, Q 0.5-0.7, -3 dB say) and try a bit of a boost around 3k.

Re: Looking for perfect EQ-setting with Fostex TH900

The best approach is to buy phones that fit and maybe only need little adjustments like Bass.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: Looking for perfect EQ-setting with Fostex TH900

Why would you not use the EQ in the ADI-2 Pro?

Re: Looking for perfect EQ-setting with Fostex TH900

This I didn't say.

BR Ramses - UFX III, 12Mic, XTC, ADI-2 Pro FS R BE, RayDAT, X10SRi-F, E5-1680v4, Win10Pro22H2, Cub13

Re: Looking for perfect EQ-setting with Fostex TH900

My apologies... in that case I don't understand your comment.

Re: Looking for perfect EQ-setting with Fostex TH900

The th900 has a incredible clean sound, only the middle (voices) should be EQed - than it is perfect
http://earphiles.org/2017/04/totl-close … shoot-out/

Adi-2 Pro, Adi-2 Dac Fs

Re: Looking for perfect EQ-setting with Fostex TH900

Danke für die Unterstützung
Momentan lasse ich es mit G +4   F 560   Q 0.5 laufen
Mal sehen, ob es nerven wird.

Herrlich die Umschaltmöglichkeit zwischen den verschiedenen Presets.

Adi-2 Pro, Adi-2 Dac Fs

Re: Looking for perfect EQ-setting with Fostex TH900

Viennacalling wrote:

Did anyone already testing the EQ-Settings to get the perfect TH900 sound with adi 2 pro?
https://www.innerfidelity.com/images/FostexTH900.pdf

I would like to have better louder voices, but i am no sound engineer

You may want to tinker with the 200hz to the 6khz portion. If its not enough, then yeah... another headphone would be a better fit.

Re: Looking for perfect EQ-setting with Fostex TH900

I have also L700 and K812 - but the th900 has sometimes more fun

Adi-2 Pro, Adi-2 Dac Fs